Laser Dark HITEMP PLUS OPAQUE soft for Heat Transfer Paper -30SH

  • Model: LASDK30
  • Manufactured by: Tape Technologies USA
Qty :

Untitled Document

Laser Transfer Paper for Dark Garments

Made in USA!

HiTemp Plus® Opaque brings a high level of opacity to your transfer onto dark-colored fabrics. It washes well and has a soft-hand feel.

Recommended Fabrics

  • Cotton
  • Polyester
  • Cotton/Poly Blends
  • Lycra
  • Some Nylons

Recommended Printers

  • All laser printers

Peels: Cold

Finish: Matte

Print Instructions

  • Make sure sheets are not stuck together
  • Do not stack more than 10 at a time
  • Do not mirror

Heat Press Instructions

  • Turn heat press at 330 degrees Fahrenheit
  • Set to light pressure
  • Trim Margins or weed excess if cut with a plotter
  • Peel transfer from backing or use transfer tape to remove image from backing
  • Position transfer print side up
  • Press for 12 seconds
  • Remove transfer when cold or about 10 seconds after pressing

Important: Please keep transfer in bag until you are ready t print to prevent moisture from forming on paper.

Not recommended for home iron

For full instructions click here