Laser Light HITEMP PLUS EXPRESS HEAT TRANSFER 8.5 X11 - 10SH

  • Model: LASLT10
  • Manufactured by: Tape Technologies USA
$8.50
Qty :
+
-

Untitled Document

Laser Transfer Paper for Light Garments

Made in USA!

This is the new general of color laser copiers and printers. It has been redesigned for use with all Xerox® EA toner copiers and printers, and a variety of other color laser copiers and printers. It transfers with less heating time onto most white or light-colored fabrics, and washes extremely well with a stretchable and breathable soft-hand feel.

Recommended Fabrics

  • Cotton
  • Polyester
  • Cotton/Poly Blends

Recommended Printers

  • Laser printers

Peels: Hot/Cold

Finish: Matte

Print Instructions

  • Select plain paper as your type and mirror your image
  • Set mode to photo quality
  • Print in either 360 or 720 dpi mode. Do not enhance color
  • Allow print to dry 15 minutes before pressing
  • Trim Margins

Heat Press Instructions

  • Turn heat press at 380 degrees Fahrenheit
  • Set to medium/high pressure
  • Do not prepress. Shirt must be cool.
  • Position paper print side down on shirt
  • Press for 20 seconds
  • Wait 8 seconds then peel transfer.
  • Place siliconized sheet or Kraft paper over transfer and press for 5 seconds
  • Peel off sheet hot or cold

Important: Please keep transfer in bag until you are ready t print to prevent moisture from forming on paper.


For full instructions click here